Reinert Ritz GmbH, Nordhorn - Klausheide
Reinert Ritz GmbH, Nordhorn - Klausheide Reinert Ritz GmbH, Nordhorn - Klausheide
Reinert Ritz GmbH, Nordhorn - Klausheide
Number of Products in this Category: 8

ProductsOther

End caps
End caps
End caps, type 1, long form
up to d 315 mm
SDR 17 / 11
PE 100 and PP
End caps type 1, long form
Article description for tender: (Reset Text )
End caps
End caps
End caps, type 2, short form
up to d 900 mm
SDR 17 / 11
PE 100 and PP
End caps type 2, short form

* optionally extension with pipe with any required length standard lengths for extension: 200 mm and 500 mm
Article description for tender: (Reset Text )
Inspection glasses
Inspection glasses
Inspection glasses, sturdy design for the observation of the hydraulic flow in the pipeline
DN 25 – DN 200
SDR 17 / 11
PE, PP or PVDF

Completely assembled inspection glasses with stainless steel bolts, Maxos-glass and EPDM O-rings, flange mating dimension according to DIN 2501, drilling PN 10

Advantages:
  • sturdy
  • resistance for chemicals
Article description for tender: (Reset Text )
Pulling headsPulling heads
Pulling heads
Pulling heads for trenchless pipelaying
up to d 900 mm
SDR 11
PE 100 Pulling head, optionally with watertight welding, long for butt fusion welding

Advantages:
  • multiple welding possible
Article description for tender: (Reset Text )
Tailor made solutions
Tailor made solutions
Tailor made solutions made of PE 100 and PP
Advantages:
  • Quick installation
  • less flanges
  • no corrosion
  • factory made weldings
  • possibility of compact and space saving design
Article description for tender: (Reset Text )
Dirt TrapDirt Trap
Dirt Trap
PE 100 dirt trap
PE 100 - SDR 17 / 11
High Pressure Flange on either side, DN 80 - DN 150. Plastic strainer with mesh diameter of 0,5 mm. Heavy duty screw connection with stainless steel external reinforcement and brass insert with 1“ internal thread.

Advantages:
  • Foreign bodies retained on the inside of the strainer
  • By attaching a cut-off valve, the dirt collection space can be flushed out
  • 100% plastic guarantees absolutely no corrosion
Article description for tender: (Reset Text )
Strainer
Strainer
PE 100 Strainer with fixed flange
PE 100 - SDR 17 / 11
DN 80 - DN 300, fixed flange, with integrated EPDM O-ring seal, flange fitting dimensions i.a.w. EN 1092-1, drilled to PN 10. Strainer in compliance with DIN 3247 - flow rate of the strainer is equivalent to the three dimensional cross-section of the nominal diameter. Optional: insertion version available - other dimensions upon request -. Usage: prevents large scale contamination of main pipe or extractor lines (strainer lines).

Advantages:
  • No corrosion
  • Limited weight and therefore lightweight handling
  • No extra seal necessary
Article description for tender: (Reset Text )
Elbows, full pressure rated
Elbows, full pressure rated
PE 100 Elbow
PE 100 - SDR 17 / 11
in every possible angle up to 45°, combinable with extended spigot, flanged connection or ReinoGrip push fit couplers
d 90 mm - d 1600 mm
PN 25 upon request

Advantages:
  • space saving due to compact form
  • highly flexible with choice
  • extreme accuracy of fitting for custom-made solutions
Article description for tender: (Reset Text )
Number of Products in this Category: 8
  • Certification
  • Contact